Up next in 10
In this video, we’ll tell you how to apply tempered glass on smartphone and how to remove bubbles from tempered glass.
Chapters
00:00 Introduction
00:27 How to Apply Tempered Glass on Smartphone
03:29 How to Remove Bubbles from Tempered Glass
04:57 Touch Sensitivity Setting
Follow Tech Countless on
Instagram:
https://www.instagram.com/techcountless
Facebook:
https://www.facebook.com/techcountless
Show More Show Less View Video Transcript
0:00
In this video, we are going to talk about how to apply tempered glass on a smartphone
0:04
I am going to apply tempered glass on a flat display smartphone
0:08
Curved display smartphones have a different method. So I am not going to talk about it in this video
0:14
In my opinion, it should be a full display cover like this
0:18
And if you take the edge to edge tempered glass, it will be better for you
0:22
The tempered glass you are seeing right now, I bought it from an offline local shop
0:26
Now let's talk about how to apply tempered glass on a smartphone
0:30
First, you have to wash your hands properly. And you have to put tempered glass in such a room where there is less dust
0:36
And close the door so that less dust comes into the room
0:40
And you have to apply tempered glass on such a flat table
0:43
And clean the table well so that no dust particles go on the screen
0:48
Otherwise, there can be bubbles there. And one more thing, make sure the lighting is good
0:53
So that when you apply tempered glass, you can see everything properly
0:56
And after that, you have to turn off the fan. And shut down the smartphone
1:01
To clean the smartphone properly, you will need two more things. Some kind of microfiber cloth and the other double-sided tab
1:08
If there is a back cover on the smartphone, you have to remove it. And then using the microfiber cloth, you have to clean the back cover well
1:17
And you have to clean the back side of the smartphone well
1:20
And you have to clean the tempered glass well. So that when you apply it, no dust comes on the screen
1:27
Now, using the other side of the microfiber cloth, you have to clean the smartphone in a circular motion like this
1:34
Now, you have to stick the double-sided tab on your finger like this
1:38
And using the yellow side, you have to remove the dust particles on the smartphone
1:47
With this method, the dust particles on the smartphone will be removed very well
1:52
Now, before removing the tempered glass, check it by aligning it 2-3 times
1:58
So that when you actually apply the tempered glass, you will get an idea of how to align it
2:04
Now, you have to remove the tempered glass. And you have to hold the tempered glass on the sides like this
2:10
And you have to keep the glue side on the bottom side. Now, you have to start aligning the tempered glass from the top side of the phone
2:17
And you have to align it well to the bottom side. If the alignment of the edge-to-edge tempered glass is wrong
2:24
then when you apply the back cover, the tempered glass may come out. You may face such a problem
2:28
For this, you have to check it 2-3 times and align it well
2:32
Now, you have to make a line from top to bottom using your finger like this
2:37
So that the air on the tempered glass will go to the side
2:41
And if you use this method, you will get to see bubbles at least
2:45
Now, in 5-10 seconds, the tempered glass will be aligned well. Here you can see that there was a lot of minor bubble in my case
2:51
So, I have removed it. If you get to see more bubbles in your case
2:55
then I will show you how to remove it later. Now, after the tempered glass is aligned, you have to clean it well
3:02
After that, after 5 minutes, you have to check the back cover
3:06
You have to check if the tempered glass is coming out from the edges
3:10
If the tempered glass doesn't come out from the edges, then it means that your tempered glass is perfectly aligned
3:15
If the tempered glass comes out from the edges, then you have to remove the back cover
3:19
and align the tempered glass properly. Put the tempered glass, then put the back cover
3:25
After that, you can turn on your smartphone. If you put the tempered glass and there are bubbles
3:31
then I will show you how to remove it. Now, to show you this, I have deliberately left some dust particles
3:38
on the screen of the smartphone. So that you can see the bubbles here
3:42
You can see here that this bubble has formed because of the dust
3:46
So, let's talk about how to remove the bubble that comes because of the dust
3:50
So, you have to put the double-sided tap on your finger like this
3:55
Then, using the other side of the tap, we will remove the dust particle
3:59
You have to remove the tempered glass on the phone like this
4:04
The glue area of the tempered glass has to be kept on the lower side
4:08
Then, using the tape, you have to remove the dust particles on the tempered glass
4:13
If there are dust particles on the phone, then you have to remove them
4:17
After that, you can apply the tempered glass. The bubbles that came because of the dust will have gone away
4:22
In some cases, air bubbles can also come. So, I will tell you how to remove them
4:28
So, using both thumbs, you have to remove the air bubbles from the outside
4:32
And if it doesn't come out, then you have to lift the tempered glass from the side
4:37
And then, using the thumb, you have to move the bubble to the outside
4:40
So, the air bubbles will come out of it. There was another air bubble here
4:45
I lifted the tempered glass a little bit like this. And I moved the air bubble to the outside
4:50
So, the air bubble has come out like this. You have to remove all the bubbles
4:55
Don't apply too much force. It is a useful setting related to touch sensitivity
#Computers & Electronics
#Gadgets & Portable Electronics
#Other